Lateral Alignment Of The Thread Catcher - Pfaff 1181 Adjustment Manual

13

Lateral alignment of the thread catcher

.07.02
Requirement
1. The tip of the thread catcher 5 must point exactly to the center of the needle.
2. The thread catcher 5 must be horizontal. It must not graze anything when it is operating.
Fig. 13 - 29
● Remove knife 1 (screw 2).
● Move needle bar to its BDC.
● Loosen stop 3 (screws 4).
● Position thread catcher 5 (screw 6) manually in front of the needle.
● Align thread catcher 5 (screws 7) according to the requirements.
For further adjustments, leave knife 1 removed and stop 3 loosened.
2
5
6
6
3
Adjustment
1
5
13 - 31