Programmed Sewing - Pfaff 3511-2/01 Instruction Manual

Sewing
10

Programmed sewing

.02
●
●
Functions in manual sewing, also see Chapter 7.04.03 Function keys:
* The function is available from mechanic level "b" on, see Chapter 12.12.01 Selecting the
●
●
●
36
For programmed sewing a seam pattern must have been created beforehand
and stored in the machine memory, see Chapter 10.03 Creating/altering seam
patterns or Chapter 10.04 Program management.
Switch on the machine, see Chapter 8.03 Switching the machine on/off.
If necessary call up the programmed sewing mode. (The LED in the key must be illumi-
nated.)
SL 2.5mm
3 3 3
Start backtacks on/off
End backtacks on/off
Edge trimmer on/off
Jig drive on/off
Sewing foot raised after
thread trimming on/off
Thread trimmer on/off
Alternate sewing
user level.
Insert the workpiece, see Chapter 9.09 Inserting the workpiece.
Select the program number of the desired seam pattern by pressing the +/- keys (P).
Start the sequence by operating the pedal, see Chapter 7.03 Pedal.
5mm
3 1 1 5
Alter seam pattern*
Line selection*
Piece counter display on/off
Support roller on/off
Corner programming*
Cycle time display on/off
Start inhibitor on/off