Pfaff 3511-2/01 Instruction Manual page 38

Sewing
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
38
SL 2.2mm
2200
Sew the fi rst seam section to the fi rst corner using the pedal function (e.g. 32 stitches).
Call up the corner programming function. (LED in the key is illuminated).
Activate the top line of the display. (LED in the key is illuminated).
Press the +/- key (S) to select the desired turn (e.g. 23 mm).
Switch on the "turn corner" function for the seam section. The turn is carried out
(the turning area can be corrected by pressing the +/- key (S)
Activate the bottom line of the display (LED in the key is not illuminated).
Press the +/- key (S) to select the second seam section.
SL 2.2mm
2200
Activate the top line of the display. (LED in the key is illuminated).
Press the +/- key (D) to select the desired stitch length value (e.g. 2.2 mm).
Sew the second seam section using the pedal function (e.g. 7 stitches).
Activate the bottom line of the display (LED in the key is not illuminated).
Press the +/- key (A) to select the desired speed (e.g. 2200).
Call up the corner programming function. (LED in the key is illuminated).
Press the +/- key (S) to select the desired turn (e.g. 10 mm).
Switch on the "turn corner" function for the seam section. The turn is carried out.
Press the +/- key (A) to select the desired speed (e.g. 2200).
Press the +/- key (S) to select the third seam section.
23mm
10 1 32
10mm
10 2 7