12
Bobbin winder
.05.08
Requirement
1.
With the bobbin winder on, the drive wheel 1 must engage reliably.
2.
With the bobbin winder off, the friction wheel 5 must not be driven by the drive wheel 1.
3.
The bobbin winder must turn off automatically when the thread level is approx. 1 mm
from the edge of the bobbin.
4
Fig. 12 - 09
●
Move drive wheel 1 (screws 2) in accordance with requirement 1 and 2.
●
Move bolt 3 (screw 4) in accordance with requirement 3.
5
1
3
Adjustment
2
2
65