9
Winding the bobbin thread, adjusting the thread tension
.02
5
Fig. 9 - 02
●
Place an empty bobbin 1 onto bobbin shaft 2.
●
Thread the bobbin in accordance with Fig. 9-02 and wind it anti-clockwise around bobbin
1 a few times.
●
Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2
and lever 3.
●
To adjust the bobbin winder tension turn knurled screw 4.
●
The bobbin winder stops automatically, when bobbin 1 is fi lled suffi ciently.
●
Remove the fi lled bobbin 1 and cut the thread on knife 5.
1
2
3
The bobbin fi lls up during sewing.
If the thread is wound unevenly, loosen nut 6 and turn thread guide 7 accordin-
gly. Retighten nut 6 after the adjustment.
Preparation
-
+
4
7
6
27