Table of Contents
Advertisement
11
Care and maintenance
11
Maintenance intervals
.01
Cleaning ............................................................ daily, more often if in continuous operation
Checking the oil level ......................................................................................... once a year
Checking/adjusting the air pressure ............................................................daily, before use
Cleaning the air fi lter of the air fi lter/lubricator .................................................... as required
11
Cleaning the machine
.02
The cleaning cycle required for the machine depends on following factors:
●
Single or several shift operation
●
Amount of dust resulting from the workpiece
It is therefore only possible to stipulate the best possible cleaning instructions for each indi-
vidual case.
Fig. 11 - 01
During all cleaning work the machine must be disconnected from the power
supply by switching off the main switch or pulling out the plug!
Danger of injury if the machine is started accidentally!
For all cleaning work the machine must be disconnected from the mains
by switching off the on/off switch or by removing the mains plug!
Danger of injury if the machine suddenly starts up .
Care and maintenance
To avoid breakdowns, the following cleaning
work is recommended for single shift ope-
ration:
●
Swing out the cover plate and tilt back
the sewing head.
●
Clean the hook and hook compartment
daily, more often if in continuous opera-
tion.
Return the machine to its up-
right position using both hands!
Danger of injury by crushing
between the edge of the ma-
chine and the table top!
53
Advertisement
Table of Contents
