Rack Mounting Instructions - IBM Netfinity 6000R User Reference Manual

Hide thumbs Also See for Netfinity 6000R:

Table of Contents

• Review the documentation that comes with your rack enclosure.

• Maintain 15 cm (6 in.) of clearance around your server for air circulation.

• Ensure the room air temperature is below 35°C (95°F).

• Plan the server installation working from the bottom of the rack up.

• Remove the rack doors and the side panels during the installation, if necessary.

• Position the template to the rack so that the edges of the template do not

overlap any other devices to be installed.

• Do not place any object weighing more than 50 kg (110 lbs.) on top of

rack-mounted devices.

• Use safe practices when lifting.

• Install the heaviest device in the bottom of the rack.

• Do not extend more than one device out of the rack.

• Connect all power cords on the server and on other devices to properly wired

kg (110.5 lbs)

and grounded electrical outlets.

• Take precautions to prevent the rack from overloading the power outlets when

you install multiple devices in a rack.

³32 kg (70.5 lbs)

The following is a list of items shipped in your rack installation kit. If any items are missing or

damaged, contact your place of purchase.

• Cable clamps (10)

• Cable-management assembly

• Cable-retainer bracket

• Cable straps (6))

• Cage nuts (12)

• Cage-nut-insertion tool

Use the attached stickers to mark the holes on

the front and the rear of the rack in the

locations indicated by the arrows on the

template.

180

IBM® Netfinity® 6000R User's Reference