Chapter 7.Solving Problems; Diagnostic Tools Overview - IBM Netfinity 6000R User Reference Manual

Chapter 7. Solving problems

Diagnostic tools overview

© Copyright IBM Corp. 2000
This section provides basic troubleshooting information to help you resolve some
common problems that might occur with your server.
If you cannot locate and correct the problem using the information in this section,
refer to "Getting help, service, and information" on page 171 for more information.
The following tools are available to help you identify and resolve hardware-related
problems:
• POST beep codes, error messages, and error logs
The power-on self-test (POST) generates beep codes and messages to indicate
successful test completion or the detection of a problem. See "POST" on page
119 for more information.
• Diagnostic programs and error messages
The server diagnostic programs are stored in upgradable read-only memory
(ROM) on the processor board. These programs are the primary method of
testing the major components of your server. See "Diagnostic programs and
error messages" on page 133 for more information.
•
Light Path Diagnostics
Your server has light-emitting diodes (LEDs) to help you identify problems with
server components. These LEDs are part of the Light Path Diagnostics that are
built into your server. By following the path of lights, you can quickly identify the
type of system error that occurred. See "Light Path Diagnostics" on page 150 for
more information.
• Troubleshooting charts
These charts list problem symptoms, along with suggested steps to correct the
problems. See the "Troubleshooting charts" on page 153 for more information.
• Customized support page
You can create a customized support page that is specific to your hardware,
complete with Frequently Asked Questions, Parts Information, Technical Hints
and Tips, and Downloadable files. In addition, you can choose to receive
electronic mail (e-mail) notifications whenever new information becomes
available about your registered products.
After you register and profile your Netfinity products, you can diagnose
problems using the IBM Online Assistant and you can participate in the IBM
discussion forum. For more detailed information about registering and creating
a customized profile for your IBM products, visit the following addresses on the
Web:
— http://www.ibm.com/pc/register
— http://www.ibm.com/pc/support
117