IBM Netfinity 6000R User Reference Manual page 16

Microprocessor:
• Intel® Pentium® III
Xeon™
• 32 KB Level-1 cache
• 1 MB or 2 MB Level-2
cache depending upon
model
• 100 MHz front-side bus
(FSB)
• Supports up to four
microprocessors
Memory:
• Maximum: 16 GB
• Type: ECC, SDRAM,
Registered DIMMs
• Slots: 4-way
interleaved, 16 slots
Drives standard:
• Diskette: 1.44 MB
• CD-ROM: 40X IDE
Expansion bays:
Hot-swap drives: Three
standard slim-high, three
optional slim-high
Active™ PCI expansion
slots:
• One 33 MHz/32-bit
• Three 66 MHz/64-bit
• Two 33 MHz/64-bit
Hot-swap power supplies:
270 W (115-230 V ac)
• Minimum: One
• Maximum: Three
Redundant cooling:
Six hot-swap fans
Video:
• S3 video controller
• Compatible with SVGA
and VGA
• 8 MB video memory
Table 1. Features and Specifications
2
IBM® Netfinity® 6000R User's Reference
Size (4 U)
• Height: 178 mm (7 in.)
• Depth: 711.2 mm (28 in.)
• Width: 482.6 mm (19 in.)
• Weight: 34.9 kg (77 lb.) to
50.4 kg (111 lb.)
depending upon
configuration
Integrated functions:
• Netfinity Advanced
System Management
processor with Light Path
Diagnostics™
• Dual channel Ultra160
SCSI controller (one
internal and one external
channel) (non-RAID)
• One 10BASE-T/100BASE-
TX AMD Ethernet
controller
• Two serial ports
• One parallel port
• Two Universal Serial Bus
ports
• Keyboard port
• Mouse port
• Video port
Acoustical noise emissions:
• Sound power, idling: 6.3
bel maximum
• Sound power, operating:
6.3 bel maximum
• Sound pressure,
operating: 47 dBa
maximum
Environment:
• Air temperature:
— Server on: 10° to 35° C
(50º to 95º F). Altitude: 0
to 914 m (3000 ft.)
— Server on: 10° to 32° C
(50° to 89.6° F).
Altitude: 914 m (3000 ft.)
to 2133 m (7000 ft.)
— Server off: 10° to 43° C
(50° to 110° F).
Maximum altitude: 2133
m (7000 ft.)
• Humidity:
— Server on: 8% to 80%
— Server off: 8% to 80%
Heat output:
Approximate heat output in
British Thermal Units (BTU) per
hour
• Minimum configuration:
461 BTU (0.14 kilowatts)
• Maximum configuration:
1796 BTU (0.53 kilowatts)
Electrical input:
• Sine-wave input (50-60 Hz)
required
• Input voltage low range:
— Minimum: 90 V ac
— Maximum: 137 V ac
• Input voltage high range:
— Minimum: 180 V ac
— Maximum: 265 V ac
• Input kilovolt-amperes
(kVA) approximately:
— Minimum: 0.08kVA
— Maximum: 0.52 kVA