Recovering Bios - IBM Netfinity 6000R User Reference Manual

Code Function
415 Analog/digital
modem

Recovering BIOS

Result
Not No modem was detected
applicable
PCI modem detected but not enabled
Failed Modem reset failed
No dial tone detected
If your BIOS has become corrupted, such as from a power failure during a flash
update, you can recover your BIOS using the flash ROM page swap jumper (J14) and
a BIOS flash diskette.
Note: Use one of the following methods to obtain a BIOS flash diskette:
• Use the ServerGuide program to make a BIOS flash diskette.
Text message Action
1. Verify that the
modem is
properly
attached to the
server.
2. If the problem
remains, replace
the modem.
If the problem
persists, call for
service.
1. Change the
configuration to
enable the
modem.
2. If the problem
remains, replace
the modem.
If the problem
persists, call for
service.
Replace the modem.
If the problem
persists, call for
service.
1. Make sure that
the phone line
attached to the
modem has a
dial tone.
(Connect a
phone to the
line and listen,
if necessary.) If
there is no tone,
have the phone
line serviced.
2. If the problem
remains, replace
the modem.
If the problem
persists, call for
service.
Chapter 7. Solving problems
145