Cabling The Server; Installing The Server In A Rack - IBM Netfinity 6000R User Reference Manual

Cabling the server

Installing the server in a rack

The following illustration shows the cabling for a typical server configuration.
Detailed cabling instructions are given in "Appendix A. Rack installation
instructions," on page 179.
Notes:
1. The illustrations in this document might differ slightly from your hardware.
2. Refer to the documentation that comes with your options for additional cabling
instructions. It might be easier for you to route any cables before you install
certain options.
3. Cable identifiers are printed on the cables that come with your server and
options. Use these identifiers to connect the cables to the correct connectors. For
example, the hard disk drive cables are labeled HDD.
Refer to "Appendix A. Rack installation instructions," on page 179 for complete
details on rack installation.
Chapter 6. Installing options
115