Minolta Di250f Operator's Manual page 213

• Select the key for the initial Image Quality
setting, and touch
"Sending Fine Print and Photos"
<Setting for the Priority Contrast>
TX Set 1
• Select , and touch
Priority Contrast
• Select the initial Contrast, and touch
Enter
.
"Adjusting Contrast for Transmission"
p. 3-12
<Setting for the Communications Mode>
TX Set 1
• Select , and touch
• Select the key for the communications
mode to be set as the initial value, and
Enter
touch .
NOTE
Com. Mode
is displayed only when a product
that supports the G3 Multi-Port Model is used.
Enter
.
p. 3-10
1171P228EA
.
1171P229EA
Com. Mode
.
1171P403EA
15. Settings for Transmission
<Setting the Initial Status for the
Transmission Mode>
TX Set 2
• Select , and touch
• Select the key for the initial transmission
Enter
mode, and touch
<Setting for attaching the TSI
Information>
TX Set 2
• Select , and touch
• Select the key for attaching the TSI initial
information style and touch
NOTE
The TSI is required on all facsimile
transmissions. It is unlawful to turn this feature
off.
p. ix
9-23
TX
.
1171P230EA
.
1171P231EA
TSI
.
Enter
.
1171P232EA