Minolta Di250f Operator's Manual page 80

3-6
1. Sending a Document
Using Direct Dialing to communicate with Overseas Destinations
• If the country code and destination's number are entered after the international code, you may hear a
busy tone during dialing and transmission may not be possible. In this case, to insert a six-second pause,
press the Pause key twice after entering the international code, and enter the rest of the number.
"Sending a Document after Talking on the Telephone"
F Code Communication
• Communication using F CODE is possible.
"F CODE" p. 5-27
If Transmission is Unsuccessful
• A non-transmission report is printed whenever a document cannot be transmitted due to the recipient's
facsimile being busy or other factors. Non-transmission reports contain part of the first page of the
document that could not be sent. However, this may not apply to unsaved transmissions. If non-
transmission reports are not required, change the setting.
"Settings for Report Printing"
The following document has not been transmitted. Try to retransmit.
USER NAME
DESTINATION
DEST. TEL#
F CODE
PAGES
RESULT
Result
BUSY Destination is engaged.
The line is busy.
NO ANS The destination is unable to receive.
The destination does not answer the telephone.
INTERR Communications are suspended.
F.MEM The memory is full.
NG Communications with all destinations were unsuccessful.
• If a document could not be transmitted, it can be re-send. To re-send, touch
touch TX to identify the document that could not be sent.
• If either the
Re-TX
possible without resetting the document. Transmission to the same recipient is possible by pressing
Re-TX . When Dest. chng
p. 9-29
:SALES
:NEW YORK
:123451234
:12345
:0 sheets
:BUSY
IMAGE
Details of Communications Status
key or key is displayed on the touch panel, re-transmission is
Dest. chng
is pressed, the recipient can be changed for re-transmission.
p. 5-8
TSI
P.1
(THU) JUL 15 1999 11:32
CHICAGO
DOCUMENT# :5114316-761
TIME STORED :11:10, 7/15
TIME SENT :11:10, 7/15
DURATION :
MODE :
 
Data and time of
printing the report
Transmission details
Activity List and then