Single Setting For Mixed Sized Documents; Mixed Original Detection - Minolta Di250f Operator's Manual

4-8

4. Single Setting for Mixed Sized Documents

Mixed Original Detection

Copy paper can be selected in accordance with the size of each document when using the Document
Feeder for copying.
NOTES
• Documents must be set in the Document Feeder to use this function. Up to 50 sheets of documents
can be set at once.
• The copy speed is slightly slower since the size of each document is detected prior to copying.
• If documents of different lengths are inserted without setting this function, the copy paper is selected
on the basis of the first page of the document, and the same size paper as the first page will be used
for the remainder (when used together with the automatic paper selection function).
• Stapling may not be possible when the automatic paper selection function is used together with this
function.
• When using the Automatic Document Feeder, only documents with the same width should be set.
• Make sure the document hits the stop when they are set.
• Adjust the document guides to the document.
<Examples of Copying Mixed Documents>
When using the Automatic Document Feeder,
copy paper can be selected in accordance with the
length of each document.
• When the automatic size is used
LTR
Ledger
Selecting Mixed Original Detection
Place the document in the Automatic
1
Document Feeder.
"Handling Documents"
Press the Copy key.
2
When using the Duplexing Document Feeder,
copy paper can be selected in accordance with the
both length and width of each document.
• When automatic paper selection is used:
LTR
Ledger
1166O365AA
• When automatic size is used to select Letter
sized paper:
3
p. 1-20
NOTE
when
and copy menus on the
and the Duplex Unit is mounted.
LGL
LTR
Ledger
LTR
LGL
Ledger
Basics
Select the menu, and touch
Mixed Orig Detection
Mixed Orig Detection
1-Sided is selected in both the document
Orig.
LGL
LTR
Ledger
1166O366AA
LTR
LTR
LTR
1166O376AA
.
1171P009EA
can be selected only
screen,
Copy