Selecting The Zoom Ratio For Copying; Zoom - Minolta Di250f Operator's Manual

3. Selecting the Zoom Ratio for Copying

Zoom

The copier can reduce or enlarge the size of copies. The zoom ratio can be set automatically in
accordance with the copy paper size to be copied, or can be set at any size.
The zoom ratio can be selected in the following ways.
• Full-Size
• Auto-Size
• Fixed Zoom (Letter, Legal, etc.) : Zoom ratios for copying regular-size documents onto regular-size
• Zoom Up/Zoom Down
• Slightly Smaller Image
• Custom Zoom
• X/Y Zoom
• Zoom Memory Input
Selecting the Zoom
Load the document in the unit.
1
"Handling Documents"
Press the Copy key.
2
Utility Mode Check
Start
: The document is copied in the same size as the original regardless
of the copy paper size.
: The optimal zoom ratio is automatically selected in accordance
with the size of the document that has been set and the selected
paper.
copy paper have already been set in touch panel keys.
: The desired zoom ratio can be set in increments of 0.1%.
: The document can be copied at a slightly smaller size than the
original by simply touching the
when copying documents with writing at the very edge of the
paper. The zoom ratio can also be changed.
: The desired zoom ratio can be set using the 10-key Pad.
: These zoom ratios can be set for the document length and width
when copying.
: Up to two most-frequently-used zoom ratios can be registered.
p. 1-20
Pause Fax Copy
Access
Interrupt
Stop
Panel Reset
1166O346AB
1166O349AB
Minimal
Basics
Select , and touch
3
4 Select the zoom ratio.
2-9
key. This is useful
Zoom
.
1171P009EA
1171P031EA