Minolta Di250f Operator's Manual page 165

Bulletin Boards
Documents can be disclosed to anyone who wants to access them by using an F CODE to establish a
Bulletin Board. Documents on a Bulletin Board can be downloaded to your facsimile by inputting the F
CODE registered for the Bulletin Board.
Establishing a Bulletin Board
"Establishing a Bulletin Board"
Sending a document to a Bulletin Board
"Registering a Document on a Bulletin Board"
Downloading a Registered Document from a Bulletin Board
"Downloading a Document from a Bulletin Board"
Remote Multi Copying
The sender can specify the number of copies to be printed at the receiving end of a transmission.
Procedure for Remote Multi Copying
Specify the F CODE (SUB) as follows.
*02*05
F CODE Password Transmissions
Only receives transmissions when the F CODE password matches. An F CODE password can be
registered for each mailbox.
F CODE Password Reception
Set "Remote input check" to "On" when registering users. "Registering Users"
Points to Note when Setting an F CODE
When this facsimile receives an F CODE, it first searches for the F CODE of the Bulletin Board (1 to 10),
and if there is no appropriate F CODE, it goes on to search the mailboxes (1 to 100) that have been set for
each user. Thus, if the same F CODE has been set for a mailbox and a Bulletin Board, the Bulletin Board
takes priority, and any documents that have been sent to the user mailbox are registered on the Bulletin
Board. In this case, not only are the documents not received at the mailbox, but also the documents
already registered on the Bulletin Board are replaced.
Thus, it is important to ensure that when an F CODE is selected for each mailbox, it does not duplicate
one already assigned to a bulletin board.
p. 11-22
p. 5-30
p. 6-5
Specifies the desired number of copies to be printed at the receiving
side.
Function code:
Specify '02' for the remote multi copying function.
5-29
17. F CODE
p. 9-18