Using The Total Cups Counter - Fagor CAT 40 NG Operating Instructions Manual

Fully automatic espresso-maker
Table of Contents

Advertisement

Available languages

Available languages

GB
• ... The appliance cannot be switched
on?
- Mains plug unplugged: insert mains
plug.
- Service door not closed: insert
brewing unit and close the sevice
door.
- Brewing unit not inserted: insert
brewing unit and close the sevice
door.
• ... Water in the coffee grounds
container?
- During every rinsing process, water
gets into the coffee grounds
container: None (for technical
reasons).
- Preceding abortion of coffee making,
for example due to insufficient water
level: check water tank for sufficient
water level prior to each use.
• ... No water comes out of the coffee
outlet during rinsing?
- Brewing unit blocked: clean brewing
unit.
• ... Descaling programme does not
start 3 seconds after pressing the
button?
- Emptying of the coffee grounds
container was not recognised: empty
the coffee grounds container or if it is
empty, pull it out and insert it again
after about 10 seconds.
17 Using the Total Cups
Counter
The coffee machine has the facility to
display the total number of cups of
coffee made.
If the Key for 2 cups of coffee (Fig. 3, a)
is used to make 2 cups of coffee at
the same time, these are counted as 2
cups.
Switch the appliance on and wait until
it is in the base position.
Simultaneously press and hold the
"Steam Pre-selector" key (Fig. 3, e)
and the "On/Off" key (Fig. 3, f)
Keep both keys pressed for around
1 second, until the Key for 1 cup of
coffee (Fig. 3, b)
Coffee Quantity indicator come on.
50
.
indicator and the
Now release both keys.
Now individual indicator lights start to
flash in sequence, showing the number
of cups made:
1 x flash corresponds to
10,000 cups
1 x flash corresponds 1,000 cups
1 x flash corresponds 100 cups
1 x flash corresponds 10 cups
1 x flash corresponds 1 cup
The flashing sequence is continuously
repeated. All the indicators are briefly
illuminated at once before each repeti-
tion.
Count the number of individual flashes
by each indicator.
Example: The following flashing
sequence corresponds to 1,529 cups.
0 x flash
1 x flash
5 x flashes
2 x flashes
9 x flashes
To exit this mode, press the "Clean"
key (Fig. 3, k)
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents