Reproduction Ratio; Reproduction Ratio P - Ricoh Aficio DSc428 Installation And Operation Manual

User Tools (Copier / Document Server Features)
❖ ❖ ❖ ❖ Auto Image Density Priority
You can set whether Auto Image
Density is "On" or "Off" when the
machine is turned on, reset, or
modes are cleared.
Note
❒ Default: Full Colour/Two-col-
our: Off, B&W/Single Colour:
On
❒ When using the Auto Colour
Select function, the settings of
Full Colour/Two-colour will be
effective.

Reproduction Ratio P.

5
❖ ❖ ❖ ❖ Shortcut R/E
You can register up to three fre-
quently used Reduce/Enlarge ra-
t i o s o t h e r t h a n t h e f i x e d
Reduce/Enlarge ratio and have
them shown on the initial display.
You can also change registered Re-
duce/Enlarge ratios.
If no Reduce/Enlarge ratio has
been set when selecting [Shortcut R
/ E 1], [Shortcut R / E 2], or [Shortcut R
/ E 3], enter the ratio using the
number keys.
❖ ❖ ❖ ❖ Enlarge 1-5
You can customize available en-
largement ratios by pressing [Re-
d u c e / E n l a r g e ] , f o l lo w e d b y
[Enlarge].
114
❒ Default:
1
/
2
❒ When selecting [User Enlrg. Ra-
❖ ❖ ❖ ❖ Priority Setting: Enlarge
You can set the ratio with priority
when [Reduce / Enlarge] is pressed,
followed by [Enlarge].
❒ Default:
Reproduction Ratio P.
❖ ❖ ❖ ❖ Reduce 1-6
You can customize available re-
duction ratios by pressing [Reduce /
Enlarge], followed by [Reduce].
Note
• Metric version:
• Enlarge 1: 115%
• Enlarge 2: 122%
• Enlarge 3: 141%
• Enlarge 4: 200%
• Enlarge 5: 400%
• Inch version:
• Enlarge 1: 121%
• Enlarge 2: 129%
• Enlarge 3: 155%
• Enlarge 4: 200%
• Enlarge 5: 400%
tio], enter a ratio using the
number keys (in the range of
101 to 400%).
Note
• Metric version: 141%
• Inch version: 155%
2
/
2