Table of Contents
Advertisement
User Tools ( Copier Features )
Orientation
You can select the original orientation
when using the Combine, or two-sid-
ed originals to one-sided Duplex
function.
Note
4
❒ Default: Do not Specify
❒ When you select [Always Specify],
you must select the orientation of
originals.
Max. Number of Sets
The maximum copy quantity can be
set between 1 and 99 using number
keys.
Note
❒ Default: 99sheets
Original Count Display
You can set to display the count of
originals and copying pages on the
display when [On] is selected.
Note
❒ Default: Off
52
Reproduction Ratio
You can select which reduce, enlarge,
or input ratio is shown on the display
with priority when [Reduce] or [En-
large] is selected.
Note
❒ Default:
• Metric version:
• Ratio 1: 50%
• Ratio 2: 71%
• Ratio 3: 93%
• Ratio 4: 141%
• Ratio 5: 200%
• Inch version:
• Ratio 1: 65%
• Ratio 2: 78%
• Ratio 3: 93%
• Ratio 4: 129%
• Ratio 5: 155%
You can set a ratio other than the
above.
A
Press the {User Tools/Counter} key.
B
Select [Copier Features] using {U} or
{T} , and then press the {OK} key.
C
Select [Reproduction Ratio] using
{U} or {T} , and then press the
{OK} key.
D
Select the ratio you want to
change using {U} or {T} , and
then press the {OK} key.
E
Select [User R/E Ratio] using {U} or
{T}, and then press the {OK}key.
F
Enter a ratio using the number
keys (from 50-200%), and then
press the {OK} key. The "Pro-
grammed" message appears.
Advertisement
Table of Contents
