Call Forwarding (Fwd) - Panasonic KX-TEM824 Features Manual

1.3.1.2

Call Forwarding (FWD)

Description
Extension users can forward their calls to preset destinations. There are 4 Call Forwarding (FWD) modes,
described below.
Mode
All Calls
Busy/No Answer
To Outside (CO) Line
Follow Me
Incoming Intercom Calls/
Outside (CO) Line Calls
[Available Destinations]
Extension (proprietary telephone [PT]/single line
telephone [SLT])
Automatic Line Access no. + Phone no.
Outside (CO) Line Group Access no. + Outside
(CO) Line Group no. + Phone no.
Voice Processing System (VPS)
Built-in Voice Message (BV) feature no.
Conditions
[General]
• This feature does not apply to calls from Hold Recall and Camp-on Recall.
• The types of calls that are forwarded by this feature are:
All calls are forwarded to another extension.
Calls are forwarded when the extension user's line is busy, or when the
user does not answer within a preprogrammed time period.
All calls are forwarded to an outside party, provided this feature is
enabled for each extension through system programming (
Forwarding to CO Line [607]).
When an extension user fails to set this feature before leaving his or
her desk, this feature can be set from the destination extension.
Extension
Destination
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
Description
Forwarded to:
1. Another Extension
2. Outside Party
3. VPS
4. BV
Availability
–
Only available when FWD to Outside (CO) Line is
enabled for the extension through system
programming ( Call Forwarding to CO Line [607]).
Only available when FWD to Outside (CO) Line is
enabled for the extension through system
programming ( Call Forwarding to CO Line [607]).
–
Only available when the BV feature is enabled for the
extension through system programming (
Extension [622]).
Call
BV for
Feature Guide 31