Panasonic KX-TEM824 Features Manual page 54

1.6 Memory Dialling Features
Input
FLASH/RECALL
(Hooking) *1
INTERCOM (Secret)
CONF (Hyphen)
*1 Available only when in system/personal programming mode
*2
Available only when in system programming mode
[Example of Secret Dialling]
When storing the number "91234567890", to hide the telephone number "1234567890",
Enter 9
Notes
• The characters for secret code, "[" and "]" (entered by pressing the INTERCOM button), are
counted as one digit each.
• It is not possible to hide the Outside (CO) Line Access number (9/0
pressing the INTERCOM button before dialling it.
* For New Zealand, the Automatic Line Access number may be either 1 or 9.
Conditions
• Outside (CO) Line Access by Memory Dialling (One-touch Dialling/System Speed Dialling)
A specific Outside (CO) Line Access number can be stored along with the telephone number in Memory
Dialling. However, if Memory Dialling is performed after selecting an outside (CO) line, the stored
Outside (CO) Line Access number is ignored and the telephone number is sent using the selected
outside (CO) line.
54 Feature Guide
Displayed while
Entering
F
[/]
*1
*2 -
INTERCOM 1 2 3 4 5 6 7 8 9 0
Description
Store an EFA signal (EFA mode) by pressing the
FLASH/RECALL button at the beginning of the
number ( 1.10.7 External Feature Access
(EFA)).
Hide all or part of the System Speed Dialling
number or One-touch Dialling number from the
display by pressing the INTERCOM button at the
beginning and at the end of the number to be
hidden (Secret Dialling). It is programmable
whether the hidden part will be shown on SMDR
( 1.20.1 Station Message Detail Recording
(SMDR)).
Store a hyphen by pressing the CONF button.
INTERCOM .
*
, or 81 through 88) by