Steering Damper; Dismantle Steering Damper; Check Steering Damper - Benelli Tornado Tre Novicento 903 Workshop Manual

258
T T
T T
L I M I T E D E D I T I O N
Tighten the safety screw under the upper plate (3).
6 N·m 0.6 Kg-m
Position the clutch command and tighten the two fixing screws
(4).
10 N·m 1 Kg-m
Connect the micro clutch connector (5) on the lever.
Tighten the semi-handlebar screw (6).
30 N·m 3 Kg-m
Insert the handle (7).
7.6

STEERING DAMPER

7.6.1 DISMANTLE STEERING DAMPER

Loosen and remove the two fixing screws (1) and remove the
steering damper (2).

7.6.2 CHECK STEERING DAMPER

Check that the damper does not show losses or damage.
Change the piece if necesary.
Do not try to straighten the slide rod.
UK
MF9_UK