Table of Contents
Advertisement
MF9_UK
T
T
T
T
L
I
M
I
T
E
D
E
D
I
T
I
O
N
Position the chain (4).
Position the nut (5) without tightening it.
Adjust the chain (see "ADJUST CHAIN").
Tighten the nut (5).
80 N·m 8 Kg-m Grease thread
7.3
FRONT AND REAR BRAKES
7.3.1 REMOVE FRONT BRAKE PUMP
The oil in the braking plant needs to be emptied before
proceeding to remove the pump. Position the end of a tube of
suitable diameter at the purge screw (1) of a front brake clamp
and the other end in a suitable recipient.
Open the purge screw (1) and empty the braking liquid. Do the
same thing with the opposite clamp.
NOTE:
To help empty the liquid, open the liquid tank cap
and work on the front brake lever repeatedly.
WARNING:
Place a rag under the connector because of the
probable leakage of braking liquid.
Remove the screw (2) and the connector (3).
UK
237
Advertisement
Table of Contents
