Table of Contents
Advertisement
YES
Continue recharging until
the tension reaches 15 V.
Wait more than 30 minutes before measuring the tension at empty of the battery.
12.8 V = recharge completed
12.0-12.7 V = recharging needs to be carried out
less than 12.0 V = change the battery
WARNING:
continuous amperage battery chargers
are not suitable for MF batteries
MF9_UK
T
T
T
T
L
I
M
I
T
E
D
E
RECHARGING WITH A CONTINUOUS TENSION BATTERY CHARGER
Measure the tension at
empty before
recharging.
Connect the battery
charger and an ampere
meter to the battery.
Begin the recharging
operation.
Is the amperage higher
thatn the standard
recharge amperage
indicated on the
battery?
NOTE:
Set the recharge time
to a maximum of 20
hours
UK
D
I
T
I
O
N
NOTE:
wait over 30 minutes
before measuring the tension at
empty of the battery
NOTE:
Set the recharge tension to 16 ~
17V. (if the tension is lower, the
recharge will be insufficient. If the
tension is higher, the battery will
overload).
Voltmeter
NO
This kind of battery
charger is not suitable
for an MF battery. We
advise using a variable
tension battery
charger.
Recharge
Ampere meter
99
Advertisement
Table of Contents
