Table of Contents
Advertisement
92
T
T
T
T
L
I
M
I
T
E
D
E
D
I
T
I
O
N
Adjustment of the preload spring is carried out using the two
ring-nuts (1) and (2) in the figure.
Loosen ring-nut (1) and adjust the preload with ring-nut (2).
Clockwise, the preload will be more rigid.
Anti-clockwise, the preload will be slacker.
Once the preload is adjusted, tighten the ring-nut (1).
Adjusting the hydraulic braking device in compensation is
carried out in sudden steps.
Rotate the adjuster (3) clockwise to increase the braking action,
or anti-clockwise to diminish it.
If you want to lengthen or shorten the wheelbase, remove the
damper from the small connecting rod, loosen the two locknuts
(4), rotate the anchorage support clockwise to shorten, anti-
clockwise to lengthen.
Adjusting the hydraulic brake device in compression is carried
out in sudden steps.
Rotate the adjuster (5) clockwise to increase the braking action
or anti-clockwise to diminish it.
UK
MF9_UK
Advertisement
Table of Contents
