Table of Contents
Advertisement
122
T
T
T
T
L
I
M
I
T
E
D
E
D
I
T
I
O
N
Position the transmission chain on the toothed wheels of the
distribution shafts.
Position the bridge and the upper chain pad and tighten the
fixing screws in two phases as in the diagram in the figure.
1st phase: 6 N·m; 2nd phase: 13 N·m
NOTE:
Always oil with Teflon SINTOFLON paste.
Re-position the fixed pad.
Position the body of the chain stretcher (1) complete with O-
ring (2) and tighten the two screws (6) as specified in the
diagram.
10 N·m 1 Kg-m
Position the rod pushing spring (3) and the washer (4) and
tighten everything with a drive screw (5) as in the diagram.
7 ÷ 8 N·m 0,7 ÷ 0,8 Kg-m
WARNING:
Always check that the chain stretcher is always in
position 0 (in exhaust) before mounting it.
Align the signs on the toothed wheels at the head level as in
the figure.
Count n° 30 chain pins from position 1 to position 30 as indicated
in the figure.
UK
MF9_UK
Advertisement
Table of Contents
