Canon DP-V2410 Instruction Manual page 61

Item
Display The following functions can also be assigned:
Function/Display
Adjustment
Function (CDL)
CDL
Channel Settings
Display Settings
Audio Settings
Marker Settings
Setting Options (underline indicates factory default)
Picture Mode (SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe
RGB, DCI-P3, User 1-7, Canon Log, ACESproxy)
Chroma, Sharpness
Backlight Control (Local Dimming (High/Low), Global Dimming, Off)
Color Gamut (SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe
RGB, DCI-P3, Native, Cinema Gamut to 709, Cinema Gamut to 2020,
Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI, DCI-P3 to
709, ITU-R BT.2020 to 709, ACESproxy, User LUT 1-8)
Gamma (2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR),
Canon Log 2, Canon Log 2 (HDR), SMPTE ST 2084, User LUT 1-8)
HDR Range
CDL Preset
CDL SOP/Sat
Channel UP
Channel DOWN
Select Input Signal (Automatic, 4K Input, Single Input/Dual Input)
Screen Scaling (Native Input Resolution, 200%, Automatic)
Frame Hold (On, Off)
Background Color (White, Gray, Off)
SDI Group (CH1-CH8, CH9-CH16)
CH L
CH R
Volume
Audio Switch (L R, L, R, MIX(L+R))
Select Input (Single Input A-D)
Marker Preset (Marker 1-5, Off)
Aspect Marker (On, Off)
Safety Zone Marker 1, 2 (On, Off)
Area Marker (On, Off)
Center Marker (On, Off)
Grid Marker (On, Off)
OSD Menu 61