Table of Contents
Advertisement
Item
Protect Settings
Password
Protect Target
Protect
Fan Settings
Fan Control
Fan Stop
Setting Options (underline indicates factory default)
Locks the settings so they cannot be changed. When you press the MENU button, "Signal/System
Information" appears, but other operations are grayed out because they are locked.
Set a password to protect settings. Use a four-digit number (0000 to 9999).
Selects the target to be protected.
Picture Mode: Select "On" to protect or "Off" to exclude settings for "Picture Mode".
On, Off
Select Channel: Select "On" to protect or "Off" to exclude settings for "Select Channel".
On, Off
Select "OK" to protect. When a password has been set, enter the password and select "OK".
• Unlocking Protect Settings
Move the selection frame to "Protect Settings" and press the SET button for approximately
3 seconds. When a password has been set, enter the password and select "OK".
Sets the operation of internal fan.
Makes the fan rotate faster before stopping in order to prevent the internal temperature from
increasing, when the fan is stopped manually.
On, Off
The fan can be stopped manually when "Fan Control" is set to "On". The fan noise can be made
silent when the video display is used during shooting or when silence is necessary.
On, Off
Note
• If the message "Invalid operation due to high temperature." is displayed, the fan cannot be
stopped even when "On" is selected for this item. Wait until the internal temperature lowers.
• At a room temperature (25 ˚C), the fan remains off for approximately one minute when the AC
power supply is used and ten minutes when the DC power supply is used. Select the type of
power supply according to the purposes.
• If the temperature inside the main unit increases while the fan is off, the message "Fan will be
rotated as the temperature is high." is displayed and the fan starts rotating approximately ten
seconds later. Since the temperature of the main unit has increased, the fan rotates faster than
usual.
• Select "Off" to restart the fan. The fan rotates faster than usual.
• The fan may not stop in some conditions, for example when used at a high temperature.
OSD Menu
63
Advertisement
Table of Contents
