Canon DP-V2410 Instruction Manual page 56

Item
Display Type
Position
Guide
Standard
Level High
Standard
Level Low
Color
Vector Scope
Enable
Target
Position
56 OSD Menu
Setting Options (underline indicates factory default)
Sets the display type. When "Line" is selected, data for one line is displayed.
All, Line
Selects the line to be displayed when "Line" is selected.
Select Line: 1 to 2160
Selects the display position.
Bottom Left, Bottom Right
A guide is displayed at the specified position. "Guide" is not displayed when "255" is selected.
1 to 255
Sets the standard display level (high). "Standard Level High" is not displayed when "255" is selected.
190 to 255
Sets the standard display level (low). "Standard Level Low" is not displayed when "0" is selected.
0 to 64
Sets the signals to be displayed and the color of signals exceeding the standard level.
Y, Cb, Cr, R, G, B: Selects the signal.
Selects the color of the selected signal.
White, Red, Green, Blue, Yellow, Cyan, Magenta
Default value of each signal is shown below.
Y (White), Cb (White), Cr (White), R (Red), G (Green), B (Blue)
Standard Level High, Standard Level Low: Selects the standard level.
White, Red, Green, Blue, Yellow, Cyan, Magenta
Default value of each standard level is shown below.
Standard Level High (Magenta), Standard Level Low (Cyan)
Configures various settings for the vector scope. Vector scope displays the intensity of color signals
and hue with the horizontal axis showing the color difference signal Cb and the vertical line showing
Cr.
(Cb, Cr) = (0, 0)
Note
• When "Frame Hold", "Peaking" or "False Color" is "On", "Vector Scope" can not be displayed.
• "Vector Scope" cannot be displayed during the execution of "Playback File" under "Screen
Capture", or when "Test Pattern" is displayed.
• When "Vector Scope" is "On", "Wave Form Monitor" is "Off".
Switches the vector scope On, Off.
On, Off
Sets the target.
75%, 100%
Selects the display position.
Bottom Left, Bottom Right
(Cb, Cr) = (255, 255)
Red
Magenta
Yellow
Cr
Green
Cyan
Cb
Blue