Canon DP-V2410 Instruction Manual page 57

Item
Audio Level Meter
Enable
Channel
Number (SDI)
Channel
Number
(HDMI)
Peak Hold
Standard
Level
Test Pattern
Setting Options (underline indicates factory default)
Configures various settings for the audio level meter. Displays the audio level of the selected channel
number.
Note
• "Audio Level Meter" cannot be displayed when "Frame Hold" is "On", during the execution of
"Playback File" under "Screen Capture", or when "Test Pattern" is displayed.
Switches the audio level meter On, Off.
On, Off
Sets the number of channels displayed when SDI signal is input. Options change according to the
setting for "SDI Group" under "Audio Settings".
When "CH1-CH8" is selected for "SDI Group": 2 CH (CH1-CH2), 4CH (CH1-CH4),
When "CH9-CH16" is selected for "SDI Group": 2 CH (CH9-CH10), 4CH (CH9-CH12),
Sets the number of channels displayed when HDMI signal is input.
2CH (CH1-CH2), 4CH (CH1-CH4), 6CH (CH1-CH6), 8CH (CH1-CH8)
When set to "On", one second of audio signal at the peak is kept.
On, Off
Sets the standard level.
-40 to 0 (-20)
Sets the test pattern built into the main unit.
White, Gray (20%), Black, Red, Green, Blue, Ramp, 5 Step, Color Bars, PLUGE, Off
Note
• If the power is turned off once and then back on, the test pattern will not be displayed.
• The test pattern will be erased in the following cases:
- When calibration has been started
- When the channel is changed using the CH button, F button assigned for Channel UP/
Channel DOWN, or "Select Channel" under "Channel Settings"
- When changing "Input Configuration" or "Select Input Signal" under "Channel Settings"
- When "Reset All Settings" is executed
6CH (CH1-CH6), 8CH (CH1-CH8)
6CH (CH9-CH14), 8CH (CH9-CH16)
OSD Menu 57