Canon DP-V2410 Instruction Manual page 38

Item
ODT Surround
Color Range
38 OSD Menu
Setting Options (underline indicates factory default)
This is displayed instead of "Gamma" and "Color Gamut" when "Picture Mode" is set to "Canon
Log" and "ACESproxy" is selected for "Color Gamut" or when "ACESproxy" is selected for "Picture
Mode".
Dim Surround: E nables Dim Surround process specified by ACESproxy (ACES 1.0).
Dark Surround: Enables Dark Surround specified by ACESproxy (ACES 1.0).
Sets the quantization range for SDI and HDMI respectively.
Automatic: Sets the range based on signal information automatically.
Full (0-255): Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limited 1 (16-235): Limits the black and white range.
Black level: 64 (10-bit)/256 (12-bit)
White level: 940 (10-bit)/3760 (12-bit)
Limited 2 (16-255): Limits the black range.
Black level: 64 (10-bit)/256 (12-bit)
White level: 1023 (10-bit)/4095 (12-bit)
Note
• Setting is disabled when "ACESproxy" is selected for "Picture Mode" or "ACESproxy" is
selected for "Color Gamut".
• Operations when "Automatic" is selected are described below.
-
When HDMI is selected, "Full (0-255)" or "Limited 1 (16-235)" is set automatically depending
on HDMI signal information.
-
When "DCI-P3" is selected for "Picture Mode", or "DCI-P3", "Cinema Gamut to DCI" or
"DCI-P3+ to DCI" is selected for "Color Gamut", "Full (0-255)" is set.
-
When "Canon Log" or "Canon Log 2" is selected for "Gamma", "Limited 2 (16-255)" is set.
-
"Limited 1 (16-235)" is set in the other cases.