Canon DP-V2410 Instruction Manual page 55

Item
Playback File
Finish
Playback File
Time Code
Enable
Type
Size
Position
Wave Form Monitor
Enable
Select Signal
Setting Options (underline indicates factory default)
Plays back captured images.
Select File: Selects a file.
Execute: Plays back the image.
Note
• When playing back captured images on other DP-V2410 or PC, color may not be played back
precisely.
Finishes playback.
Display the time code superimposed on the SDI signal.
VITC 01:23:45.05
Note
• "Time Code" cannot be displayed when "Frame Hold" is "On", during the execution of
"Playback File" under "Screen Capture", or when "Test Pattern" is displayed.
Switches the time code display On, Off.
On, Off
Selects the type.
VITC, LTC
Selects the size.
Large, Small
Selects the display position.
Top Left, Top Right, Bottom Left, Bottom Right
Configures various settings for the wave form monitor. On the wave form monitor, the horizontal axis
shows the horizontal resolution of the video and the vertical line shows the signal level.
Signal level
Note
• When "Frame Hold", "Peaking" or "False Color" is "On", "Wave Form Monitor" can not be
displayed.
• "Wave Form Monitor" cannot be displayed during the execution of "Playback File" under
"Screen Capture", or when "Test Pattern" is displayed.
• When "Wave Form Monitor" is "On", "Vector Scope" is "Off".
Switches the wave form monitor On, Off.
On, Off
Sets the waveform to be displayed.
Y, Cb, Cr, R, G, B
254
0
Horizontal resolution of video
100 %
50 %
0%
4%
OSD Menu 55