Table of Contents
Advertisement
Nomenclature
■ Front face of the main unit
2
Stand
1
Headphone terminal
2
USB port
3
CH1 to 3 buttons
4
CDL button
5
F1 to F8 buttons
6
MENU button
7
Jog dial
RESET button
(Power) button
8
Power indicator
9
1
3
There are two mounting positions.
Connection for headphone set.
Connection for an external sensor for calibration (
grading controller (Element-Tk made by Tangent Wave Ltd).
Changes channel.
Switches between normal and CDL mode.
Execute the defined function. You can assign different functions on F buttons in the
normal and CDL modes respectively.
Opens/closes the OSD menu, or moves up one level in a menu.
Moves the selection frame within the OSD menu, changes the settings (up/down, left/
right, rotation) and determines (press) the selection.
Resets the items to be adjusted using the slider and entered characters.
Turns power On/Off.
Displays the status of the main unit. The brightness of the power indicator can be set
from "Off" or "1 (dark) to 5 (brightest)" (
will flash during firmware upgrade, or when an error is detected.
Off: when AC or DC power supply is not connected
Green lit: when an AC or DC power supply is connected and the power of the video
display is on
Green flash: during calibration or firmware upgrade
Amber lit: during standby (an AC or DC power supply is connected and the power of the
video display is off)
Amber flash: when error is detected
4
5
6
62). Even when the power indicator is "Off", it
1
9
7
8
22), USB memory, HUB, or color
Nomenclature
12
48
–
27
–
26
18
18
18
17
–
9
Advertisement
Table of Contents
