I D E O A N D A U D I O C O N N E C T O R S
Connect to a monitor with a VGA or DVI port (the type of
configuration). The appropriate cable is usually included with
Follow these steps to connect an monitor to your computer:
1. Check that the computer is powered off and the monitor
power switch is turned off.
2.Attach the video cable to the monitor port on the
computer. Secure the cable connection with the screws
3.Connect the monitor power cable and plug it into a
properly grounded wall outlet.
4.Follow any setup instructions in the monitor's user's guide.
5.Turn on power to the monitor, then the computer.
6.Make sure that the current resolution and refresh rate do
not exceed the specifications of the monitor. If necessary
change the display settings used by the computer.
To access the display controls, press the Windows key (
type "Display" and then click on Display.
Headphones and microphone
These ports allow you to connect audio devices. Use the
headphone port to plug in stereo headphones or powered
speakers. Plugging an audio device to the headphone port
disables the built-in speakers. Use the microphone port to
connect an external microphone for mono recording;
Video and audio connectors - 59
) + W,