The BIOS utility is a hardware configuration program built
into your computer's BIOS.
Your computer is already properly configured and optimized,
and you do not normally need to run this utility. However, if
you encounter configuration problems, you may need to run
To activate the BIOS utility, press <F2> while the computer
logo is being displayed.
To set the boot sequence in the BIOS utility, activate the
BIOS utility, then select Boot from the categories listed on
the left of the screen.
To set a password on boot, activate the BIOS utility, then
select Security from the categories listed on the left of the
Find Set Supervisor Password and enter a password to
enable this feature. Once you have entered a password for
this feature, you may then enable/disable Password on
Remember to select <F10> to properly save and exit the
BIOS utility when you are done making changes.
B I O S
U T I L I T Y
BIOS utility - 45