Operation; Start-Up; Description Of The Home Screen - DeDietrich ALEZIO O HYBRID User Manual

5

Operation

5.1

Start-up

5.2

Description of the home screen

Fig.11
1
2
4
5.3 Operation
Tab.17 Changing my heating temperature
Function
Change the room tempera­
ture.
Change the room tempera­
ture temporarily.
Tab.18 Changing my domestic hot water temperature
Function
Change the domestic hot
water setpoint.
Force domestic hot water
production (override).
Tab.19 Changing my cooling temperature
Function
Change the cooling tem­
perature.
The installer must have au­
thorised the cooling func­
tion.
7763552 - v02 - 29062020
If the control panel is in standby, turn the selection button to access the
home screen.
3
MW-3001019-3
Access
Select the Zone to be changed with the rotary
button, for example
temperatures
Select the Zone to be changed with the rotary
button, for example
mode > Temporary heating temperature change
Access
Select the Zone Domestic Hot Water with
the rotary button > Set heating temperatures
Select the Zone Domestic Hot Water with
the rotary button > Operating mode > Temporary
heating temperature change
Access
Select the Zone to be changed with the rotary
button, for example
temperatures
1. Switch on the outdoor unit and the indoor module.
2. The heat pump begins its start-up cycle.
If the start-up cycle runs normally, an automatic venting cycle is
initiated. Otherwise, an error message is displayed.
1 Symbol for the appliance and circuit flow temperature
2 Hydraulic pressure
3 Temperature measured by the outdoor temperature sensor
4 Status of the appliance
CIRCA > Set heating
CIRCA > Operating
CIRCB > Set cooling
Settings
– Select the activity you want to modify.
– Change the temperature for the activity.
– Set the temporary room setpoint for the cir­
cuit selected.
– Define the end time for the temporary set­
point.
Settings
Change the comfort or reduced domestic hot
water setpoint.
– Define the end time for the temporary Com­
fort setpoint.
Force domestic hot water production at the
comfort domestic hot water setpoint tempera­
ture
Settings
– Select the activity you want to modify.
– Change the temperature for the activity.
200 ESL HYBRID
5 Operation
27