Generic; Addressable Vsi (Vsi-Add) - AVE RegCom-Pro Operation Manual

4. PROGRAMMING

GENERIC

Select "REGISTER SELECT" Tab then select "GENERIC"
in drop-down menu.No menu will apprear and merely sets
the RegCom-Pro to "Generic" mode.
Figure 12: GENERIC menu

ADDRESSABLE VSI (VSI-ADD)

Select "REGISTER SELECT" Tab then select "ADDRES-
SABLE VSI" in drop-down menu.The ADDRESSABLE
VSI menu will appear:
Figure 13: ADDRESSABLE VSI menu
SET ADDRESS
Choices: ANY, 1, 2, 3,..., 253, 254, 255
AD4323
Select "REGISTER SELECT" Tab then select "AD4323"
in drop-down menu.No menu will apprear and merely sets
the RegCom-Pro to "AD4323" mode.
Figure 14: ADS Menu
ADS
Select "REGISTER SELECT" Tab then select "ADS" in
drop-down menu.The ADS menu will appear:
Figure 15: ADS Menu
DISPLAY
Choices:JOURNAL, RECEIPT
RegCom-Pro POS / Cash Register Interface
ANSI
Select "REGISTER SELECT" Tab then select "ANSI" in
drop-down menu.No menu will appear:
Figure 16: ANSI menu
This selects an ANSI driver for the RegCom-Pro. In this
mode standard ANSI terminal commands sent to the
RegCom-Pro will control the display of the data on the
monitor. See Appendix for a detailed command set sup-
ported.
BLEEP
Select "REGISTER SELECT" Tab then select "BLEEP"
in drop-down menu .The BLEEP menu will appear:
Figure 17: BLEEP menu
CASIO
Select "REGISTER SELECT" Tab then select CASIO in
drop-down menu.The CASIO menu will appear:
Figure 18: CASIO menu
18