Generic; Tcpip; Figure 11: Register Select Sub-Menu; Figure 12: Tcpip Sub-Menu - AVE VSI-Pro Max Operation Manual

5. PROGRAMMING

GENERIC

Press the "Up" or "Down" button to move the cursor to
"REGISTER SELECT" and press "Set". The REGISTER
SELECT sub-menu will appear:
GENERIC

TCPIP

ALOHA
ALPHANUMERIC PENNINE V8.13
ARCIRIS IRIDIUM
ADDRESSABLE VSI
AD4323
ADS
ANSI
- - - - - - - - - NEXT PAGE
EXIT
Figure 11: REGISTER SELECT Sub-Menu Page 1
Press the "Up" or "Down" button to move the cursor to
"GENERIC" and press "Set". In this mode is simply no
filtering of the input data and will display any printable
character in the video. If you are not sure of what you are
connecting to this is the first selection so you will see
everything and then later choose the options you want to
better filter the display to your liking.
TCP/IP
1. Press the "Up" or "Down" button to move the cursor to
"TCPIP" and press "Set". The TCPIP menu will appear:
IP ADDRESS
DISPLAY INFORMATION
DOWNLOAD CONFIGURATION
EXIT

Figure 12: TCPIP Sub-Menu

Press the "Up" or "Down" button to move the cursor to "IP
ADDRESS" and press "Set" to enter and change the IP
Address to the same as the IP Address you wish to
monitor.
EXAMPLE: If the IP address is 192.168.0.141, set the
address on the TCPIP 232 Adapter using this menu.
IP ADDRESS
IP ADDRESS
IP ADDRESS
IP ADDRESS
EXIT

Figure 13: TCPIP IP Address Sub-Menu

VSI-Pro Max POS / Cash Register Interface
1 : 192
2 : 168
3 : 0
4 : 141
2. Press the "Up" or "Down" button to move the cursor to
"EXIT" and press "Set" to return to the previous menu.
3. Press the "Up" or "Down" button to move the cursor to
"DISPLAY INFORMATION" and press "Set" to enter the
DISPLAY INFORMATION sub-menu.
INFORMATION 0
INFORMATION 1
INFORMATION 2
INFORMATION 3
EXIT
Figure 14: DISPLAY INFORMATION Sub-Menu
NOTE: The choices are On or OFF and selects the differ-
ent packettes of information printed on the reciept to your
selection.
4. Press the "Up" or "Down" button to move the cursor to
"EXIT" and press "Set" to return to the previous menu.
5. Press the "Up" or "Down" button to move the cursor to
"DOWNLOAD INFORMATION" and press "Set" to
execute. Make sure a TCPIP232 Adapter is connected
and the VSI-Pro Max will download the IP settings to
this device.
Refer to: Appendix M Page 87 for additional information
on the TCPIP232 Adapter or the manual included with the
adapter.
NOTE: The TCPIP232 Adapter can be programmed by
this method or by using a standard PC with a serial cable
along with any communications software like
Hyperterminal. Refer to the TCIP232 Adpater Manual for
doing this.
Once you have set the IP address of the TCPIP232 Adapter
you will be in the "Generic" display mode. You may se-
lect another register driver to format this display. When
you do this the VSI-Pro Max loads the default register
baudrate as if a direct connection to the register so make
sure you set the proper baudrate as described below.
The TCPIP232 Adpater communicates with the VSI-Pro
Max via RS-232 at a baudrate of 19.2K. Therefore when
you select this menu option the baudrate of the VSI-Pro
Max is changed to this rate so communication for down-
loading the configuration can occur. When using the
TCPIP232 adpater with other register drivers or data dump
mode make sure you change the RXD baudrate to 19.2K
so the VSI-Pro Max will communicate with the TCPIP232
adapter.
18
ON
ON
ON
ON