Set Time/Date; Text Display - AVE RegCom-Pro Operation Manual

SET TIME/DATE

Select "REMOTE" Tab. Set time and date in DATE and TIME section or select check box "Use Current Time Date" for
load Time and Date from remote computer.

4.5 TEXT DISPLAY

This page will give you more control over the actual text block formatting and its appearance on the monitor.To access
the page,Select "TEXT SETUP" Tab.The following page will appear:
OUTPUT CHARACTER / LINE
Select OUTPUT CHARACTER / LINE drop-down menu. This setting allows you to change the number of characters per
line from 10 to 40.
RegCom-Pro POS / Cash Register Interface
Figure 82: Time/Date Setting Page
Figure 83: Text Display Setting Page
31
4. PROGRAMMING