Setting The Options For Fax/Tel Mode - Canon B740 Manual

Setting the Options for Fax/Tel Mode

If you set Fax/Tel Mode, you can control precisely how the copier/fax handles
incoming calls by adjusting the following settings:
• Adjust the time the unit takes to check whether a call is from a fax machine or a
telephone (RING START TIME setting).
• Adjust the length of time the unit rings when the call is a voice call (F/T RING TIME
setting).
• Set whether the copier/fax switches to receive mode after the ring time set in F/T
RING TIME has elapsed (DEFAULT ACTION setting).
What Happens When Fax/Tel Mode is Selected
Type of call
Telephone charges
begin for the caller.
RING START TIME
(Factory default
setting = 8 sec.)
F/T RING TIME
(Factory default
setting = 15 sec.)
8-4
Receiving Faxes
Telephone
The copier/fax answers without ringing.
The copier/fax listens for the fax tone.
(For 8 sec.)
The fax tone is not detected.
The copier/fax starts ringing.
If you don't pick up the handset
(within 15 sec.).
DEFAULT ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT.
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a
fax tone. For those cases if you set the
DEFAULT ACTION to RECEIVE, the copier/fax
switches to receive mode automatically and
starts receiving the document. If no document
comes in, it disconnects the call after
approximately 40 seconds.
Fax
Sending document
manually
The fax tone
is detected.
Fax
Sending document
automatically
The document is
received automatically .
(The fax tone is
detected and the
copier/fax switches to
receive mode.)
Pick up the
handset to talk.
DISCONNECT
The copier/fax
disconnects the call.
Chapter 8