Connecting The Power Cord - Canon B740 Manual

Connecting the Power Cord

Before connecting the power cord, read the guidelines in Important Safety Instructions.
(1 p. 1-6)
Follow this procedure to connect the power cord:
Connect the supplied
power cord to the
power cord connector
on the back of the
copier/fax. Then
connect the other end
into a properly
grounded 120 V AC
three-prong outlet.
The copier/fax has no power switch, so its power is on as long as it is plugged in. Once
connected, though, the unit still needs to warm up before you can use it. Wait until the
LCD no longer displays PLEASE WAIT.
n
• The unit is equipped with a three-prong, grounding-type plug provided with a third
(grounding) pin. This plug will only fit into a grounding-type outlet. This is a safety
feature. If you are unable to insert the plug into your outlet, contact an electrician to
replace your outlet. Do not defeat the safety purpose of the grounding-type plug by
breaking off the third prong or using a 3-to-2 adapter.
• Do not plug the unit into the same circuit as an appliance such as an air conditioner,
electric typewriter, television, or copier. Such devices generate electrical noise that can
interfere with your copier/fax's ability to send and receive faxes.
Chapter 2
2-7
Setting Up