Setting The Options For Fax/Tel Mode - Canon L240 User Manual

Setting the Options for Fax/Tel Mode

If you set Fax/Tel Mode, you can control precisely how the FAX handles incoming
calls by adjusting the following settings:
ING STA T TIME
–
call is from a fax machine or from a telephone (default: 8 seconds).
F/T ING TIME
–
is from a telephone (default: 22 seconds).
DEFAULT ACTION
–
disconnects the call after the ring time set in
(default: switches to receive mode).
■
What Happens When Fax/Tel Mode is Selected
When the FAX receives a call, it responds according to the type of call as follows:
Telephone charges
begin for the caller.
RING START TIME
(Default setting
= 8 sec.)
F/T RING TIME
(Default setting
= 22 sec.
8-6 Receiving Faxes
setting: Adjust the time the FAX takes to check whether a
setting: Adjust the length of time the FAX rings when the call
setting: Set whether the FAX switches to receive mode or
Type of call Telephone
The FAX listens for the fax tone.
The fax tone is not detected.
If you don't pick up the handset
RECEIVE
Not all fax machines are capable of sending a fax tone. For those cases if you set
EFAULT ACTION
the
and starts receiving the document. If no document comes in, it disconnects the call
after approximately 40 seconds.
F/T ING TIME
Fax
Sending document
manually
The FAX answers without ringing.
(For 8 sec.)
The fax tone is
detected.
The FAX starts ringing.
(within 22 sec.).
EFAULT ACTION
Choose between:
ISCONNECT.
(default setting) and
-+-18-
(Default setting)
RECEIVE
to , the fax switches to receive mode automatically
has elapsed
Fax
Sending document
automatically
The document is
received automatically.
(The fax tone is
detected and the FAX
switches to receive
mode.)
Pick up the handset
to talk.
ISCONNECT
The fax disconnects
the call.
Chapter 8