Button Operation - Allworx 9204 Manual

4

Button Operation

Button
KEYPAD None
INTERCOM Solid green when in
use.
CONF Blinking green while
making connections.
(Conference)
Solid green with an
active 3-way
Conference.
Solid red with an active
4-way Conference.
Flashes Red and
Green when recording
a call.
TRANSFER Solid red until the call
is transferred.
MESSAGES Solid red if new
messages are present.
RELEASE None
PARK None
INFO Solid green when in
use.
SPEAKER Solid green when in
use.
MUTE/DND Solid red when Mute.
Solid amber in Do not
Disturb mode.
Flashing amber.
HOLD Solid red if the call is
on hold.
Navigation None
Soft key None
Selection
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or
Phone Guide – 9204
Light
Use the keypad to dial numbers in order to place a call.
Use the phone as an intercom.
Talk to two or three parties at a time using the 3 or 4-Way
Conference functionality.
Will indicate when Call Assistant - Call Recording is in progress.
Transfer a call to another extension using a Blind or an Attended
Transfer.
Access the Message Center.
Disconnect the call you are on currently.
Parks a call (PBX behavior) or system-wide hold (key system
behavior)
View functionality of all the buttons on the phone: Feature Keys,
Programmable Function Keys (PFK), Scroll Keys, Selection Keys,
and Keypad.
Use the phone as a speakerphone or activate a headset.
Turn off the microphone in handset, speakerphone, or headset.
Prevent incoming calls (Do Not Disturb).
Indicate Presence other than "In Office"
Place a call on hold.
Use the up arrow to move up on the LCD screen. Use the down
arrow to move down. Use the button in the center to Select and Save
settings.
Use the buttons below the display to select a soft key.
registered trademarks of their respective owners
Revised: September 1, 2010
Purpose
Page 5