Button Operation - Allworx 9102 Phone Manual

4

Button Operation

Button
Keypad None
Messages Solid red if new
messages are present.
Transfer Solid red until the call is
transferred.
Conference Blinking green while
making connections
Solid red when in use.
Intercom Solid green when in
use.
Release None
Info Solid green when in
use.
(9112 only)
Speaker Solid green when in
use.
Mute/DND Solid red when Mute.
Solid amber in Do not
Disturb mode.
Flashing amber.
Hold Solid red if the call is
on hold.
Navigation None
Soft key None
Selection
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007Allworx Corp. All rights reserved. Allworx is a registered trademark of Allworx Corporation. All other names may be trademarks or registered
Phone Guide – 9102 / 9112
Light
Use the keypad to dial numbers in order to place a call.
Access the Message Center.
Transfer a call to another extension using a Blind or an Attended
Transfer.
Talk to 3 parties at a time using the 3-Way Conference functionality.
Use the phone as an intercom.
Disconnect with the call you are on currently.
View functionality of all the buttons on the phone: Feature Keys,
Programmable Function Keys (PFK), Scroll Keys, Selection Keys, and
Keypad.
Use the phone as a speakerphone or activates a headset.
Turn off the microphone in handset, speakerphone, or headset.
Prevent incoming calls (Do Not Disturb).
Indicate Presence other than "In Office"
Place a call on hold.
Use the up arrow to move up on the LCD screen. Use the down arrow
to move down. Use the button in the center to Select and Save
settings.
Use the buttons below the display to select a soft key.
trademarks of their respective owners.
Revised: October 10, 2007
Purpose
Page 7