Programming Mode; The Purpose Of Programming Mode; The Control Panel In Programming Mode - Rena Envelope Imager I Instruction Manual

6. Programming mode

6.1 The purpose of programming mode

Programming mode is used to set certain parameters manually via the
control panel. These comprise settings for the fonts, the print quality, the
paper as well as special and test fu nctions.
As the printer is usually operated from a word or address processing
program, the works settings are optimized for this purpose and do not
usually need to be changed.
It may, however, be necessary to adapt these parameters. They will all
be treated in this section so that you can make these adaptations and
utilize all the options of your address printer.
This section is designed as a reference source for experienced users.

6.2 The control panel in programming mode

Switching to programming mode:
•
Switch to off-line mode.
•
Press the prog key.
The following message appears briefly in the display:
Followed by
You are now in programming mode. The word "SETTING" blinks in the
display.
612s(Ei1)_Operations Rev: 5/12/03
RENA Address Printer
DA612S
Programming
SETTING
Inkjet
Mode
: No 1
25