Error Messages And Warnings - Rena Envelope Imager I Instruction Manual

9.3 Error messages and warnings

9.3.1 Error messages
Error message
ERROR LCA INITIALIS.
CALL SERVICE
ERROR LCA1 Ready
CALL SERVICE
ERROR LCA2 Ready
CALL SERVICE
ERROR LCA3 Ready
CALL SERVICE
ERROR PEN BOARD#
CALL SERVICE
NO PAPER !!
PAPER JAM OR
WRONG PAPER LENGHT
NO INK !!
CHANGE PRINTHEAD #
CHECKSUM ERROR !!
MAKE DEFAULT RESET
CHECKSUM ERROR !!
MAKE COUNTER RESET
CHECKSUM ERROR !!
TESTMACRO RESET
CHECKSUM ERROR !!
SETTING RESET
612s(Ei1)_Operations Rev: 5/12/03
Description
Error in loading the hardware into
the XC5210 module
Error in printing – module XC5210
Printing error. The number after
„LCA" shows which module
is responsible
Error Pen Board, #1,2 oder 3
No paper in feed
Paper jam, or an incorrect format
was set
The cartridge is empty. #1,2,3
#shows the number of the cartridge.
Error in buffered RAM.
RENA Address Printer
Solving the problem
Check connection on/to print
-
board of Module XC5210
Module XC5210 may need to be
-
replaced.
Pen Board(s) may need to be
-
replaced
- Insert paper
Set paper feed correctly
-
Meassure paper format and lock
-
the setting
Insert new cartridge and reset
-
the counter.
Perform Default Reset (Power
-
on while holding down prog key)
45