Printer Functions; Programming Mode; What Is Programming Mode For; Getting Into Programming Mode - Rena DA-590 Operation Manual

Printer functions

5.

Programming mode

What is programming
mode for ?
Κ
Getting to
programming mode
\text\da590\printer functions
The printer is delivered with factory default menu settings. To change the
print quality, for example, you must go into programming mode.
Programming mode is used for the manual setting of specific parameters via
the control panel.
The "menu overview" section lists the menu fields and their options.
The printer set-up can be changed by using the RENASET program, by
sending escape sequences from software , or in programming mode.
- Change over to off-line mode by pressing the "start" key.
- Then press the "prog" key.
- The following display appears briefly:.
-The printer is in programming mode when the following display appears:
5.1
DA 590
Programming mode
(Menu field) blinking
Inkjet
(Option field)
DA590 Instruction Manual