Digital Projection HIGHlite 660 3D Series
Infrared reception
The projector has infrared sensors at the front and back.
The angle of acceptance is 40°. Make sure that the remote control is within the angle of acceptance when trying to
control the projector.
Installation and Quick-Start Guide
REMOTE CONTROL
Infrared reception
Notes
40°
Infrared reception is confirmed by
the blue Infrared indicator flashing
on the control panel.
The infrared receivers are disabled
when a remote control is connected
via a cable. For more information,
see
Wired remote control
40°
Connection Guide.
Rev E February 2015
in the
page 9