Panasonic HMWIN User Manual page 67

Figure 72
Expand the properties view of the Properties pane, by clicking on "Show Advanced Properties" button:
Figure 73
Following properties, highlighted in green in the picture above, can be configured:
PageRequest
CurrentPage
SyncOptions
ACGM0195V1EN
HMWIN Studio User Manual
This property determines the page to be shown on the HMI and on
HMWIN Client.
Attached Tag must contain an integer value within the range of the
available project pages.
The attached Tag must be available at least as a Read resource.
This property represents the page number actually displayed on the HMI
or on HMWIN Client or on both.
Attached Tag must be available at least as a Write resource and must
have data type that allows containing an integer value.
SyncOptions value can be set as one of following options:

Local: if you want that CurrentPage represents the number of
page actually displayed on HMI,

Remote: if you want that CurrentPage represents the number of
page actually displayed on HMWIN Client.
This property determines the synchronization of the project pages with
the value contained into the CurrentPage property.

Disable: CurrentPage value is ignored.

Local: CurrentPage value corresponds to the page displayed on
HMI.

Remote: CurrentPage value corresponds to the page displayed
on HMWIN Client.

Local + Remote: CurrentPage is changed according to page
67