Related Manuals for Panasonic HMx700 Series
Summary of Contents for Panasonic HMx700 Series
- Page 1 Touch Terminals HMx700 Series Instruction Manual ACGM0197V4EN Version 4.0 2023.01 https://industry.panasonic.eu...
- Page 2 This manual and everything described in it are copyrighted. You may not copy this manual, in whole or part, without written consent of Panasonic. Please direct support matters and technical questions to your local Panasonic representative. Distributed by Panasonic Industry Europe GmbH https://industry.panasonic.eu...
-
Page 3: Table Of Contents
Table of contents Introduction ............................... 4 Important symbols ............................ 4 Special instructions for use ........................5 Standards and approvals ......................... 5 Product overview ............................6 Product identification ..........................6 Technical data common to all models ..................... 7 Hardware specifications ........................7 Environmental conditions ........................ -
Page 4: Introduction
Introduction Introduction This instruction manual contains information about the installation, transportation, storage, assembly, use and maintenance of touch terminals of the HMx700 series. The following models are available: HMx705 Touch terminal with 5” TFT color widescreen, multi-touch capacitive touchscreen HMx707 Touch terminal with 7” TFT color widescreen, multi-touch capacitive touchscreen HMx710 Touch terminal with 10.1”... -
Page 5: Special Instructions For Use
Special instructions for use Special instructions for use • The product shall only be used in an area of not more than pollution degree 2, as defined in IEC/EN 60664-1. • The product shall be installed in an enclosure that provides a degree of protection not less than IP54 in accordance with IEC/EN 60079-15. -
Page 6: Product Overview
1920x1080 guarantees great optical performance. With the support of multi-touch gesture programming the HMx700 series touch terminals can provide the most natural human interfaces. The HMx700 series touch terminals have been designed to run the software HMWIN Studio for powerful HMI applications. -
Page 7: Technical Data Common To All Models
Technical data common to all models Technical data common to all models Hardware specifications Touchscreen technology Projected capacitive 3V, 50mAh lithium, rechargeable, not user-replaceable, Real-time clock back-up battery model VL2330 Fuse Automatic 4GB (HMx705, HMx707, HMx710) Flash memory 8GB (HMx715, HMx721) 512MB (HMx705) 1GB (HMx707, HMx710) 2GB (HMx715, HMx721) -
Page 8: Electromagnetic Compatibility (Emc)
Backlight service life (LED type) value when the surrounding air temperature is 25°C) * see note The HMx700 series front glass is resistant (no visible changes) to the following chemicals and liquids after an application time of 24 hours: Betadine (10% povidone solution), Coffee, Cola, Dextrose... -
Page 9: Viewing Angles
Technical data common to all models Viewing angles The viewing angles for the horizontal (L, R) and vertical (U, D) axes are specified in reference to the vertical axis of the display. The viewing angles always refer to the standard mounting orientation. For the viewing angle values (U, D ,L, R), refer to the technical data of the respective touch terminal model. -
Page 10: Technical Data By Model
Technical data by model Technical data by model HMx705, HMx707, HMx710 HMx705 HMx707 HMx710 Display / Backlight TFT color / LED Colors Resolution (pixel) 800 x 480 1280 x 800 Brightness 300cd/m² typ. 500cd/m² typ. Display size (inch) 5” widescreen 7”... -
Page 11: Hmx715, Hmx721
Technical data by model HMx715, HMx721 HMx715 HMx721 Display / Backlight TFT color / LED Colors Resolution (pixel) 1366 x 768 1920 x 1080 Brightness 400cd/m² typ. 300cd/m² typ. Display size (inch) 15.6” widescreen 21.5” widescreen Dimming yes (to 0%) Flash memory Operating system Linux RT... -
Page 12: Product Dimensions
Product dimensions Product dimensions HMx705 Cutout 147mm 107mm 136mm 96mm 56mm ACGM0197V4EN Version 4.0... -
Page 13: Hmx707, Hmx710, Hmx715, Hmx721
Product dimensions HMx707, HMx710, HMx715, HMx721 Cutout Model HMx707 187mm 147mm 176mm 136mm 47mm HMx710 282mm 197mm 271mm 186mm 56mm HMx715 422mm 267mm 411mm 256mm 56mm HMx721 552mm 347mm 541mm 336mm 56mm ACGM0197V4EN Version 4.0... -
Page 14: Unpacking And Packing Instructions
Unpacking and packing instructions 10. Unpacking and packing instructions HMx705, HMx707, HMx710 HMx715, HMx721 To repack the product, please follow the instructions backwards. ACGM0197V4EN Version 4.0... -
Page 15: Installation
• The max. deviation from the plane surface to the cutout is ≤0.5mm. • The thickness of the case where the product is mounted is from 1.5mm to 6mm. • The max. surface roughness where the gasket is applied is ≤120μm. (1) HMx700 series touch terminal (2) Installation cutout ACGM0197V4EN Version 4.0... -
Page 16: Installation Procedure
Installation 11.2 Installation procedure For details on installation, please refer to the “Installation Guide” provided with the product. Place the fixing brackets contained in the fixing kit as shown in the following figure. Notice Make sure to screw each fixing screw until the bezel corner gets in contact with the panel. Tightening torque: 130Ncm ACGM0197V4EN Version 4.0... -
Page 17: Connections
Connections 12. Connections 12.1 HMx705 (4) (5) (1) USB port (V2.0, max. 500mA, for maintenance only) (2) Power supply (3) Serial port (4) Ethernet port 0 (10/100Mbit) (5) Ethernet port 1 (10/100Mbit) (6) Expansion slot for plug-ins (7) SD card slot ACGM0197V4EN Version 4.0... -
Page 18: Hmx707, Hmx710, Hmx715, Hmx721
Connections 12.2 HMx707, HMx710, HMx715, HMx721 (1) USB port (V2.0, max. 500mA, for maintenance only) (2) Ethernet port 2 (10/100Mbit) (3) Ethernet port 1 (10/100Mbit) (4) Serial port (5) Ethernet port 0 (10/100/1000Mbit) (6) Power supply (7) 2x expansion slot for plug-ins (8) SD card slot ACGM0197V4EN Version 4.0... -
Page 19: Serial Port
Connections 12.3 Serial port The serial port is used to communicate with the PLC or with another type of controller. Standards available for the signals in the PLC port connector are: RS232, RS422, RS485. Use the corresponding communication cable for the connection. The serial port is software programmable. -
Page 20: Optional Plug-Ins
Connections 12.5 Optional plug-ins There are two optional plug-ins available for the HMx700 series. Depending on the touch terminal type, there are one or two expansion slots. Slot #2 and slot #4 are available only if the plug-in module is equipped with the bus extension connector. -
Page 21: Power Supply, Grounding, And Shielding
Connections 12.6 Power supply, grounding, and shielding The power supply terminal block is shown in the following figure. +24V Common M 3 conductors, minimum 1.5mm² wire diameter, minimum temperature conductor rating 105°C NOTE Make sure that the power supply has sufficient power capacity for the operation of the product. The product must always be grounded to earth using a wire with a minimum diameter of 1.5mm². -
Page 22: Battery
Battery 13. Battery The touch terminals are equipped with rechargeable lithium batteries that are not user-replaceable. The battery is needed to keep the real-time clock running (date and time). When the touch terminal is installed for the first time, the battery must be charged for 48 hours. When the battery is fully charged, data backup at 25°C is guaranteed for 3 months. -
Page 23: Getting Started
Getting started 14. Getting started The HMx700 series touch terminals must be programmed with the programming software HMWIN Studio (starting from v2.6), a Windows application. There are two options to transfer an HMWIN application project to a touch terminal: Ethernet Connect the touch terminal via the Ethernet interface to a personal computer running the HMWIN Studio software. -
Page 24: Record Of Changes
Record of changes 16. Record of changes ACGM0197V4EN, January 2023 • Deleted the chapter “System settings tool” • Updated the description for the yellow LED in chapter “12.4 Ethernet port” • Updated company name and back page • Modified the manual design ACGM0197V3EN, April 2021 •... - Page 25 Panasonic Industry Europe GmbH Caroline-Herschel-Strasse 100, 85521 Ottobrunn, Germany +49 89 45354-1000 https://industry.panasonic.eu January, 2023...